Automatically shuts off the gas supply. PDS (Remote Panel): Optional unit for remote monitoring. 🔌 Wiring and Connection Guide
The valve is usually normally open and requires a manual reset after a trip. Sensor Interconnection:
Knowing the exact valve model you are using will help me provide a more detailed pinout for your specific wiring. sakz mk 2 shema podkljuchenija
Sensors are often connected in a "daisy chain" or to specific ports on the BSU marked "Input" (Вход).
Connect the impulse valve to the unit using the dedicated "Valve" (Клапан) port. Automatically shuts off the gas supply
The SAKZ-MK-2 typically uses connectors for fast, "plug-and-play" installation. Follow these steps for a standard setup: Valve Connection:
Ensure the valve is installed on the gas line with the arrow pointing in the direction of the gas flow. Sensor Height: Sensor Interconnection: Knowing the exact valve model you
If using a remote panel, connect it to the BSU or the last sensor in the chain to receive status signals. Plug the BSU into a standard 220V outlet .