A1/A2, you must typically use to flash via TFTP or Telnet: Configure PC : Set a static IP (e.g., 192.168.1.2 ). Enter Failsafe : Unplug power, connect PC to LAN1 . Power on and wait for the DMZ LED to light up.
: You should look for legacy images under the brcm47xx target for A1/A2 versions.
D-Link DIR-320 is a legacy device with several hardware revisions (A1, A2, and B1), and finding the correct OpenWrt firmware (proshivka) requires identifying your specific version first. openwrt dir 320 skachat proshivku
: You can then telnet to 192.168.1.1 or use a TFTP client to upload the .bin or .trx firmware file. Important Limitations
: Due to the 4MB Flash and 32MB RAM, modern OpenWrt versions with a web interface (LuCI) may not fit or will run extremely slowly. Alternative Firmware : Many users prefer or A1/A2, you must typically use to flash via
Before downloading, check the sticker on the bottom of your router for the .
: Version 10.03 (Backfire) is generally the most stable official release for this hardware. : You should look for legacy images under
: Features a Broadcom BCM5354 CPU (240 MHz), 4MB Flash, and 32MB RAM.