: Wait for the confirmation beep (idle signal) and release the buttons. 4. Arming and Flying
: Turn on your transmitter and set the throttle to maximum. kk2.jpg
This step ensures all motors start at the same time and respond equally to your throttle: : Ensure propellers are OFF . : Wait for the confirmation beep (idle signal)
: Plug your receiver outputs into the left side of the board. Follow the pin definitions for Aileron, Elevator, Throttle, and Rudder. This step ensures all motors start at the
: Move the throttle to zero and the rudder stick to the far left.
Based on the file reference "kk2.jpg," this guide covers the , a popular and budget-friendly board used for building DIY quadcopters. This controller is unique because it features a built-in LCD screen and buttons, allowing you to configure your drone without needing a computer. 1. Hardware Assembly
