: Go to Panel Settings > Mirror and toggle it On/Off.

: Place the extracted .bin file (often named allupgrade_53_2G.bin or similar) directly into the root directory of the USB.

: Use a tool like WinRAR to extract the .bin file from the downloaded archive. 2. Installation Steps (USB) Format USB : Use a FAT32-formatted USB drive.

: In Panel Settings , adjust LVDS Bit/Map until the colors look correct.

If the TV is on but the display is distorted or has no picture due to a resolution mismatch, you can try entering these codes on your remote while the TV is on: : Input 0371 .