In CNC Simulator Pro , creating (milled or engraved characters) is primarily handled through the integrated SimCam CAD/CAM module. This allows you to generate text and convert it directly into the G-code required for 3D simulation. Key Methods for Milling Text
To ensure the text appears as a 3D carved or raised object rather than just a path, you must manage your settings: CNC Simulator Pro
: Use narrow-angled bits, such as a 30° or 60° V-bit , for fine text details to ensure they engrave deeply without breaking thin lines. In CNC Simulator Pro , creating (milled or
: To hollow out the center of characters for a recessed look. : To hollow out the center of characters for a recessed look
: For "solid" characters that aren't just single lines, you can use: Contour Milling : To cut around the outer edge of letters.
: If solid text simulation is lagging, use the fast-forward button or temporarily disable solid in the view panel to check toolpaths before doing a final solid run. 12.2.24. Milling Text - CNC Simulator Pro
: In the settings editor, ensure the male solid buffer type is set to 3D (not just 2.5D) for the most realistic depth visualization.