Bunni.3mm3.zip – Verified

: Depending on the specific "Bunni" pose, you may need "Tree" or "Organic" supports for overhanging ears or limbs.

: Remove any support structures carefully with flush cutters. bunni.3mm3.zip

: Use 0.1mm to 0.16mm for high detail, especially for the facial features. : Depending on the specific "Bunni" pose, you

: If using this as a leathercraft accessory, utilize an Acrylic Zipper Guide to ensure the zipper tape is perfectly aligned before gluing and stitching. bunni.3mm3.zip

: A 15-20% Grid or Gyroid infill is typically sufficient for decorative figurines.