Anime-av4 May 2026

: Layers 4, 5, and 6 are identical. Install the brass standoffs into layer 6 , then stack layer 5, followed by layers 4 and 3.

: Install stabilizers, then foam, followed by leaf-spring gaskets on both sides of the plate before placing the plate onto the foam. Anime Vanguards (Alternative Match)

: Use the included cotton gloves and microfiber cloth to keep the acrylic clean and free of fingerprints. Assembly Steps : anime-av4

: If using an acrylic riser, stack the riser layers and secure them with four 20mm screws.

: Before assembly, install and then remove the brass standoffs into each hole on layers 3, 4, and 5 to clear any burrs from the cutting process. : Layers 4, 5, and 6 are identical

features a seven-layer acrylic design with tighter tolerances than previous models.

: Work toward acquiring Vanguard units such as Broly or Sunjun Wu , which are obtained through specific endgame dungeons. Anime Vanguards (Alternative Match) : Use the included

Grind (like Kunchi Palace Act One) for levels and essence stones.